It’s been a while since I’ve posted some progress updates on the truck build so here it goes. The following is a short list of components I’ve changed out and a few maintenance items performed:
I had approximately four quarts of automatic transmission fluid changed out and did an oil change with fine lab results.
I replaced one Blue Sea Systems fuse block with the higher capacity Safety Hub 150. The Safety Hub 150 is rated for up to 280A and allows the use of higher current/interrupt rated MIDI®/AMI® fuses in addition to smaller ATO/ATC fuses. I also finally got around to covering up the exposed “hot” points on the isolation breaker, upgraded a few ground wires and replaced the Odyssey Group 34R battery with a NorthStar 27F battery.
After giving the exhaust a few love taps on a trail recently I had a new pipe welded onto the end of the muffler. There’s so much more clearance this way…
I replaced the Rigid LED flood lights with a Vision X Light Cannon. This light is simply amazing!
After putting enough dents into the rear bumper is was time to get a new-to-me bumper off of craigslist for $80 and replace the disgusting chrome with some satin black spray paint.
Those are all of the updates for now, what’s your favorite truck mod?